How to Reset a Kenmore Refrigerator

Last Updated on May 11, 2022

If you are having problems with your Kenmore refrigerator, the first thing you should do is try to reset it. Many times, this will fix the issue.

Do your Kenmore Refrigerator has a Reset button?

Which Kenmore Refrigerators has a Reset button?

There’s no reset button on new models of Kenmore cooler. In particular, one that controls the power of the compressor. But, there are switches for ice makers.

There is only a power button that allows you to turn on or off the ice creator.

There is another button that controls the turning ice plate. It simply resets the ice-production process.

So it’s a high chance that if you have a new model of Kenmore refrigerator, then there will be no reset button. As most coolers are made along these lines.

Guide to Reset Kenmore Refrigerator with a ” Reset Button” – Old Models

Kenmore refrigerators are equipped with a reset button that can be used to restart the appliance if it malfunctions.

In most cases, the reset button is located behind the control panel near the bottom of the fridge.

If you cannot find the reset button, consult your Kenmore refrigerator’s user manual for more information.

To reset your Kenmore refrigerator, simply press and hold the reset button for three to five seconds.

The appliance should then cycle through a self-diagnostic mode and return to normal operation.

Guide to Reset Kenmore Refrigerator without “Reset Button” – New Models

If your Kenmore refrigerator does not have a reset button, then follow these steps and we will guide step by step.

Step 1: Open your Ice Creator Compartment

Open the cooler and check out the Ice Creator Compartment.

For the French door and next to each other kind of coolers, the ice creator compartment is situated on the left door.

The last step is to pull the ice creator dim-hued handle until it pops.

Step 2: Eliminate the ice storage caddie

Then, on the off chance that your ice producer is on the left half of the door, take out the ice stockpiling caddie.

Simply lift and haul it out.

Step 3: Press the switch until the Plate turns

This switch that you want to find is normally covered up.

This button can make your ice plate pivot. Also, it sort of ‘resets’ your ice producer.

The button is situated under the little whiteboard on the furthest left side(The part beneath the on/off switch).

Just Press it ordinarily until you see your ice plate turn 180 degrees.

This will presently make it drop a square of ice.

Then, the machine will likewise fill it with water. What’s more, it’ll freeze another arrangement of ice like it used to do.

Note: You have to skip the fourth step if the plate turns as mentioned.

And if not, then only follow the 4th step.

In the event that this progression functioned admirably right away, indeed, congrats!. You’re near resetting your Kenmore cooler in just 35 seconds.

Step 4: Utilize a Hair Dryer to liquefy overabundance ice

In case the switch isn’t working regardless of how frequently you press it. The ice producer and everything inside the cavity is frozen.

Thus, to liquefy them and accelerate the interaction, utilizing a hairdryer.

Blow warm air to the pivoting instrument inside your ice creator.

Do this on different parts that are frozen and possibly stuck also.

And afterward, press the switch again a few times.

No doubt, the ice plate will presently turn and deliver the ice inside. Then, at that point, it’ll return to its normal position.

Caution: But prior to doing this, put a towel first under your ice machine. You’ll be liquefying a ton of ice so expect water spills anyplace.
For 2-door clients, repeat step#4 for each door compartment separately.

This could take around 5 to 10 minutes depending on the thickness of the ice.

Caution: If it’s taking excessively lengthy, rest your hairdryer for a couple of moments. This is to keep it from overheating. Likewise, don’t put it excessively near your refrigerator’s parts. There could be parts that are extra sensitive to heat.

You have successfully reset the Kenmore Refrigerator!

We will continue with a few more steps to ensure safety after the reset.

Step 5: Ensure that the compartment is Dry

The next step is to clean the compartment. This is to avoid any wrecking. In addition to that, there will be dampness all over the place.

Wipe all wet regions with a towel. You can also use the hairdryer to accelerate the cycle.

Step 6: Put back the caddie and the ice compartment cover

Reinsert the ice storage caddie. Then close the compartment.

Note: Make sure that it’s shut appropriately. There ought not to be any holes as warm air will cause dampness. This can reduce the ice creator’s working capacity.

Step 7: Set your cooler to the best temperature

After the reset process, the ice chest’s temperature may be set excessively high. And this may cause the ice producer to work.

First, check out the ice chest’s temperature before switching on and loading up the refrigerator.

Check whether the temperature is set ideal. If not, change it immediately.

The standard temperature is 37° F‌ ‌(3 °C‌) for fridges.

This is the standard setting in recently purchased models.

While for the freezer, it’s 0° F‌ ‌(- 18 °C‌).

Step 8: Reboot the Refrigerator

In case the ice producer is as still misbehaving, you can reboot the refrigerator one more time.

Generally, this tackles the vast majority of the clients’ concerns and if not, contact Kenmore or a repairman.

Note: If this doesn’t take care of your concern, the last thing you can do is to find the ‘thaw out switch.’ This could be inside your cooler or at its back access board.

What to do if your Kenmore refrigerator isn’t cooling

If your Kenmore refrigerator isn’t cooling properly, there are a few things you can do to troubleshoot the issue.

First, check to make sure that the unit is set to the correct temperature. If it is, then just clean the condenser coils. These coils are responsible for dissipating heat, and if they’re dirty, they won’t be able to do their job properly.

Once you’ve cleaned the coils, give the unit 24 hours to see if the problem persists. If it does, then you may need to replace the air filter. A clogged air filter can block airflow and prevent the unit from cooling properly.

Finally, if none of these steps resolve the issue, you may need to call a Kenmore technician for further assistance.

How to Reset the fridge if the Kenmore refrigerator stops working

To reset a Kenmore refrigerator that has stopped working, there are a few key steps that you should follow.

  • The first step is to turn off the power to the fridge by unplugging it or flipping the circuit breaker in your electrical panel. Next, you should allow the fridge to set and cool down for about an hour.
  • Then, check the compressor for any signs of damage or malfunctioning parts, such as a burnt-out belt or frayed wiring.
  • If you suspect that either of these issues may be responsible for your Kenmore refrigerator shutting down, you may need to hire a professional repair technician to diagnose and fix the problem.

In most cases, however, resetting your Kenmore refrigerator should be sufficient to get it up and running again.

With proper care and maintenance, this appliance can continue providing reliable storage for your foods and beverages well into the future.

What to do if the reset button on the Kenmore refrigerator doesn’t work

Some Kenmore refrigerators are equipped with a reset button that can be used to restart the appliance if it stops working properly.

However, if the reset button does not seem to be working, there are a few things that you can try.

  • First, check to make sure that the refrigerator is plugged into an outlet and that the outlet is working.
  • Next, check the circuit breaker and reset it if necessary. If the Kenmore refrigerator still does not seem to be working, you may need to call a Kenmore service technician for assistance.

Tips for keeping your Kenmore refrigerator running smoothly

Kenmore refrigerators are known for their high-quality design and durable construction, making them a favorite among homeowners and renters alike.

If you want to ensure that your Kenmore refrigerator continues to run smoothly, there few tips to consider:

  • Regularly defrost your refrigerator so that accumulated ice doesn’t put undue strain on the motor.
  • Avoid packing your Kenmore refrigerator too full, as this can increase the risk of food spoiling or leaking.
  • Additionally, make sure to check all seals and door gaskets regularly for wear and tear, and replace any damaged parts as soon as possible.

With these simple tips, you can keep your Kenmore refrigerator running smoothly for years to come!

Final Thoughts

While it is possible to troubleshoot any issues with a Kenmore refrigerator on your own, there are some problems that may require the help of a professional.

If you have tried unsuccessfully to reset your refrigerator or if you are experiencing other difficulties, please call Kenmore’s toll-free number(1-844-553-6667) for assistance.

Kenmore’s team of experts will be happy to help you get your fridge up and running again in no time.

For Samsung customers: How to Reset your Samsung Refrigerator

Leave a Comment

Your email address will not be published.