kenmore refrigerator not cooling

How to Reset Kenmore Refrigerator

Learn how you can reset the Kenmore refrigerator with or without the reset button. In addition to that, If your Kenmore refrigerator is not cooling, then there are a few things that you should try to do to solve the issue.

Guide to Reset Kenmore Refrigerators

First, know which models have a reset button.

There’s no reset button on new models of Kenmore coolers. In particular, one that controls the power of the compressor. But, there are switches for ice makers.

There is only a power button that allows you to turn on or off the ice creator.

There is another button that controls the turning ice plate. It simply resets the ice-production process.

So it’s a high chance that if you have a new model of Kenmore refrigerator, then there will be no reset button. As most coolers are made along these lines.

Reset Kenmore Refrigerators with a ” Reset Button” – Old Models

Steps to reset Kenmore refrigerators with a Reset Button:

  1. Locate the Reset Button behind the control panel near the bottom of the fridge.
  2. If you cannot find the reset button, consult your Kenmore refrigerator’s user manual for more information.
  3. Simply press and hold the reset button for three to five seconds.
  4. The appliance should then cycle through a self-diagnostic mode and return to normal operation.

Note: Old Kenmore refrigerators are equipped with a reset button that can be used to restart the appliance if it malfunctions. However, the new models may not have any reset button.

Reset Kenmore Refrigerators without “Reset Button” – New Models

If your Kenmore refrigerator does not have a reset button, then follow these steps and we will guide step by step.

  1. Open your Ice Creator Compartment. For the French door and next to each other kind of coolers, the ice creator compartment is situated on the left door.
  2. Pull the ice creator dim-hued handle until it pops.
  3. Eliminate the ice storage caddie. On the off chance that your ice producer is on the left half of the door, take out the ice stockpiling caddie. Simply lift and haul it out.
  4. Press the switch until the ice plate turns 180 degrees.
    • This button can make your ice plate pivot. Also, it sort of ‘resets’ your ice producer.
    • The button is situated under the little whiteboard on the furthest left side(The part beneath the on/off switch).
  5. Then, the machine will likewise fill it with water. What’s more, it’ll freeze another arrangement of ice like it used to do.
  6. You have to skip the 7th step if the plate turns as mentioned as the reset process is completed. And if not, then only follow the next step.
  7. Blow warm air to the pivoting instrument inside your ice creator to liquefy the frozen part and accelerate the interaction. And afterward, press the switch again a few times. The ice plate will presently turn and deliver the ice inside. Then, at that point, it’ll return to its normal position. You have successfully reset the Kenmore Refrigerator.
    • Do this on different parts that are frozen and possibly stuck also.
    • Caution: But prior to doing this, put a towel first under your ice machine. You’ll be liquefying a ton of ice so expect water spills anyplace.
    • Caution: If it’s taking excessively long, rest your hairdryer for a couple of moments. This is to keep it from overheating. Likewise, don’t put it excessively near your refrigerator’s parts. There could be parts that are extra sensitive to heat.
  8. The next step is to clean the compartment. This is to avoid any wrecking. In addition to that, there will be dampness all over the place. Wipe all wet regions with a towel.
  9. Reinsert the ice storage caddie. Then close the compartment.
    • Note: Make sure that it’s shut appropriately. There ought not to be any holes as warm air will cause dampness. This can reduce the ice creator’s working capacity.
  10. After the reset process, the ice chest’s temperature may be set excessively high and this may cause the ice producer to work. First, check out the ice chest’s temperature before switching on and loading up the refrigerator. Check whether the temperature is set ideal. If not, change it immediately.
    • The standard temperature is 37° F‌ ‌(3 °C‌) for fridges.
    • This is the standard setting in recently purchased models.
    • While for the freezer, it’s 0° F‌ ‌(- 18 °C‌).
  11. The last step is to reboot the refrigerator one more time.

What to do if your Kenmore refrigerator is not Cooling

If your Kenmore refrigerator is not cooling properly, there are a few things you can do to troubleshoot the issue.

  1. First, check to make sure that the unit is set to the correct temperature. If it is, then just clean the condenser coils. These coils are responsible for dissipating heat, and if they’re dirty, they won’t be able to do their job properly.
  2. Once you’ve cleaned the coils, give the unit 24 hours to see if the problem persists. If it does, then you may need to replace the air filter. A clogged air filter can block airflow and prevent the unit from cooling properly.
  3. Finally, if none of these steps resolve the issue, you may need to reset the Kenmore Refrigerator.

How to Reset the fridge if the Kenmore refrigerator stops working

To reset a Kenmore refrigerator that has stopped working, there are a few key steps that you should follow.

  1. The first step is to turn off the power to the fridge by unplugging it or flipping the circuit breaker in your electrical panel. Next, you should allow the fridge to set and cool down for about an hour.
  2. Then, check the compressor for any signs of damage or malfunctioning parts, such as a burnt-out belt or frayed wiring.
  3. If you suspect that either of these issues may be responsible for your Kenmore refrigerator shutting down, you may need to hire a professional repair technician to diagnose and fix the problem.

In most cases, however, resetting your Kenmore refrigerator should be sufficient to get it up and running again.

With proper care and maintenance, this appliance can continue providing reliable storage for your foods and beverages well into the future.

What to do if the reset button on the Kenmore refrigerator doesn’t work

Some Kenmore refrigerators are equipped with a reset button that can be used to restart the appliance if it stops working properly.

However, if the reset button does not seem to be working, there are a few things that you can try.

  1. First, make sure that the refrigerator is plugged into an outlet and that the outlet is working.
  2. Next, check the circuit breaker and reset it if necessary. If the Kenmore refrigerator still does not seem to be working, you may need to call a Kenmore service technician for assistance.

Tips for keeping your Kenmore refrigerator cooling system running smoothly

Kenmore refrigerators are known for their high-quality design and durable construction, making them a favorite among homeowners and renters alike.

If you want to ensure that your Kenmore refrigerator cooling system continues to run smoothly, there few tips to consider:

  • Regularly defrost your refrigerator so that accumulated ice doesn’t put undue strain on the motor.
  • Avoid packing your Kenmore refrigerator too full, as this can increase the risk of food spoiling or leaking.
  • Additionally, make sure to check all seals and door gaskets regularly for wear and tear, and replace any damaged parts as soon as possible.

With these simple tips, you can keep your Kenmore refrigerator running smoothly for years to come!

Final Thoughts

While it is possible to troubleshoot any issues with a Kenmore refrigerator on your own, there are some problems that may require the help of a professional.

After following the above guide, if still, your Kenmore refrigerator is not cooling, then call Kenmore’s toll-free number(1-844-553-6667) for assistance.

Kenmore’s team of experts will be happy to help you get your fridge up and running again in no time.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *